Breaking News

Dear Madam or Sir,

last week our e-mail address was hacked by a virus and is now used to send fake-e-mails under false senders to spread a Trojan.

 

Don't open the e-mail(s)!

 

For any information, please, contact our company under the phone number:

+49 (0)7762 /5212-40

 

Date: 20/05/19

 

New Development

 

Electrical Parting Unit

EC-75

EC752

 

Electrical pneumatical/

hydraulic
cutting machine

SCH

 

SCH - 090913


We also offer the service for / repair of Weidmüller's CCM-cutting machines.

 

 

SCH
Electro-pneumatic / hydraulic cutting machine for cutting flat material, cables up to 150mm² or wires of up to Ø 12mm

  

SCH - 090913Feeder opening height: max. 40 mm
Feeder opening width:  max. 75 mm

• Fast and easy operating via the plastic foil keyboard

Software includes item and order processing

• The installed Compact-Flash card of 128 MB permits to save up
   to:  
- 30.000 production programmes  
        
- 300 jobs with up to 100 single positions

• Standard electrical exists protected against short circuits for de-reeler, prefeeders, coiling machines and stackers as well as marking units



• AC-servo positioning drive with start and brake ramp control
• Parallel driven belt feed supported by six rollers with drive measuring and with pneumatic opening and
  closing device. Cutting capacity up to 2000 cycles / an hour (depending on the material)

• Hydro-pneumatic cutting cylinder with guillotine, blade made of HSS-steel with cutting force from 0-15000 N or 0-30000 N


Options  

• Wheel measuring  

• TEKUWA PC Kit (PC software for connecting cutting machines to customary PCs)  


Technical specifications 

Power supply: 230 V

Air consumption: 3.5 l at 6 bar
Air pressure:   6-10 bar

Electr. power connection: approx. 400 Watt

Length of belt feed: approx. 400 mm
Force of belt feed:   max. 1500 N

Feeder opening width:   max. 75 mm
Feeder opening height: max. 40 mm

Height:  530 mm
Width:   930 mm
Depth:   750mm
Weight: approx. 105 kg  

 

 

 

The machine is conform with the present and current CE-guide lines.
Subject to technical alterations

 

 

SMH with hydraulic cutting unit



Electro-pneumatic / hydraulic cutting machine for cutting steel cables of a Ø of up to 12 mm (Ø 20 mm), copper cords of up to 150 mm²
 



SMH: hydraulic cable cutting machine Fast and easy operating via the plastic foil keyboard

• Software includes item and order processing

• The installed Compact-Flash card of 128 MB permits to
   save up to:
  - 99000 production programmes
  - 300 jobs with up to 100 single positions

 • As standard the machine is equipped with short-circuit-proof 
   interfaces for de-reelers, prefeeders, coiling machines and
   stackers as well as marking units and ink-jets

• AC-servo positioning drive with start and brake ramp control

• Parallel driven belt feed supported by six rollers with drive measuring and with 
  pneumatic opening and closing device. Infinitely variable speed regulation from
  0 - 2.5 m/sec

• Hydro-pneumatic cutting cylinder having double effect, equipped with two V-cutting blades made of
  HSS tool-steel with adjustable cutting force from 0 - 15000 N or 0 - 30000 N



 Options

 • Wheel measuring

 • TEKUWA PC Kit (PC software for connecting cutting machines to customary PCs)
 




Technical specifications

Power supply: 220/230 V
Air pressure: 6-10 bar
Length of belt feed: ca. 400 mm
Force of belt feed: max. 1500 N

Feeder opening width: max. 30 mm
Feeder opening height: max. 30 mm

Height: 500 mm
Width: 1000 mm
Depth: 630 mm
Weight: approx. 90 kg  



The machine is conform with the present and current CE-guide lines.
Subject to technical alterations

SMR with rotating blade
Electro-pneumatic cutting machine with micro-processor for cutting difficult materials such as profiles, tubes etc. up to a maximum width of 50 mm and a maximum height of 40 mm, straight cuts without deforming or squeezing the material
 

 

SMR: cutting machine with rotary blade Fast and easy operating via the plastic foil keyboard

• Software includes item and order processing

• The installed Compact-Flash card of 128 MB permits to
   save up to:
   - 99000 production programmes
   - 300 jobs with up to 100 single positions

 • As standard the machine is equipped with short-circuit-proof
   interfaces for de-reelers, prefeeders, coiling
   machines and stackers as well as marking units and ink-jets

• AC-servo positioning drive with start and brake ramp control

• Parallel driven belt feed supported by six rollers with drive measuring and with pneumatic opening and
   closing device. Infinitely variable speed regulation from 0 - 2.5 m/sec

• Belt feed pressure pneumatically adjustable

• Pneumatic cutting unit with rotating blade or saw blade, diameter 170 - 250 mm


 Options

 • Wheel measuring
 



Technical specifications

Power supply: 220/230 V
Air pressure: 6-10 bar

Height:   500 mm
Width:  1000 mm
Depth:    630 mm
Weight: approx. 90 kg  

 

The machine is conform with the present and current CE-guide lines.
Subject to technical alterations

 

 

 

Cutting machine SC-75
Electro-pneumatic cutting machine for cutting cables, plastic and insulating tubes, flat cables as well as battery cable
 

 

 

electropneumatic cable cutting machine SC-75Feeder opening height: max. 40 mm

Feeder opening width: max. 75 mm

• Cutting capacity of up to 12000 cycles per hour  depending on material

  and length

• Fast and easy operating via the plastic foil keyboard

• Software includes item and order processing

• The installed Compact-Flash card of 128 MB permits to save up to:

 - 99000 production programmes

 - 300 jobs with up to 100 single positions

• As standard the machine is equipped with short-circuit-proof interfaces for de-reelers, prefeeders, coiling machines and stackers as well as marking units and ink-jets

• Detection of cable end

• AC-servo positioning drive

• Parallel driven belt feed supported by three rollers with pneumatic opening and closing device • Cutting     

  unit pneumatically operated with cutting and counter blade as well as blade guides made out  of high-quality HSS tool-

  steel

• Cutting force from 1800 - 3000 N depending on the respective cutting cylinder

• Optionally there are different kinds of blades and belts available depending on the material

 

 Options  
• Additional guide block  
• Wheel measuring  
• Venturi system for plastic tubes and nylon braids (material is transported by air)  
• TEKUWA PC Kit (PC software for connecting cutting machines to customary PCs)  
• Special versions

 

Technical specifications

Power supply:        220/230 V

Watt consumption: approx. 400 W

Air pressure:          6-10 bar

Noise emission:      less than 75 dbA

 

Height:  360 mm

Width:   490 mm

Debth:  480 mm

Weight: approx. 45 kg

 



The machine is conform with the present and current CE-guide lines.
Subject to technical alterations.

We use cookies to improve our website and your experience when using it. Cookies used for the essential operation of the site have already been set. To find out more about the cookies we use and how to delete them, see our Privacy Policy.

I accept cookies from this site
EU Cookie Directive plugin by www.channeldigital.co.uk