Tekuwa GmbH

    Tekuwa GmbH

    Finsterbachstr. 13

    79664 Wehr

    info@tekuwa.de

telefon +49 7762 5212-40

fax

+49 7762-5212-44

Exhibition Munich:

productronika 2015

  14.-17. November 2017

  We would be          

  pleased to welcome
  you at our

  stand 201 in hall
  A5.

  Of course it is
  possible 
to make an
  appointment in
  advance- therefor,
  please, send us an
  email.

 
 
Intermediate stripping unit
Electro-pneumatic application for the intermediate stripping of cables up to a diameter of 20 mm
 


intermediate stripping unit Tekuwa
• Stripping length: 15 - 30 mm

• This machine is equipped with an SPS-control

• It's connected to the master machine such as SCM, SC, SMT etc.
   and started via a signal (key contact or 24 V)

• The stripping process is fully automatic.


Technical specifications

Power supply:    220/230 V

Air pressure:      6-10 bar

Weight:              approx. 80 kg

Height:               295 mm

Wigth:                850 mm

Debth:               460 mm

 

 



The machine is conform with the present and current CE-guide lines.
Subject to technical alterations.

 
 
Cutting and stripping machine SCM 20 SP
with hydraulic cutting unit

Compact electro-pneumatic cutting and stripping machine for cables of a bigger cross-section
 


• Fast and easy operating via the plastic foil keyboard

• Software includes item and job processing

• The installed Compact-Flash card of 128 MB permits to save up to:
  - 99000 production programmes
  - 300 jobs with up to 100 single positions

• Marking programme

• As standard the machine is equipped with short-circuit-proof interfaces for de-reelers, prefeeders, coiling
  machines and stackers as well as marking units and ink-jets

• AC-servo positioning drive

• Parallel driven belt feed with drive measuring protected against overloading and with pneumatic
  opening and closing device (optionally additional wheel measuring)

Cutting unit: Hydraulic cutting cylinder with two V-cutting blades
  guarantees precise and unobstructed cutting of materials of a Ø of up to 20 mm.
  The hydraulic energy is realized by a pneumatic pressure converter

• Adjustable cutting force from 0 - 15000 N or 0 - 30000 N

• Clamping force pneumatically adjustable


 


 Options

 • Detection of material end

 • Wheel measuring
 




Stripping length
The maximum total stripping length 150 mm divided on one or both ends of the material


Processing diameter
20 mm


Technical specifications

Speed of belt feed: 0 - approx. 3 m/sec (depending on the material)
Power supply:         220/230 V
Watt consumption:  approx. 400 W
Air pressure:           6-10 bar
Noise emission:       less than 75 dbA

Height:  650 mm
Width:   1240 mm
Depth:   700 mm
Weight: approx. 120 kg

 

 

The machine is conform with the present and current CE-guide lines.
Subject to technical alterations.

 

 

Cutting and stripping machine SCM with two cutting units
Compact electro-pneumatic cutting and stripping machine for single- and multi-conductor cables, solid wires and cords with nearly all customary insulations
 





• Fast and easy operacut & strip machine SCM 2SKting via the plastic foil keyboard

• Software includes item and job processing

• The installed Compact-Flash card of 128 MB permits to save up to:
 - 99000 production programmes
 - 300 jobs with up to 100 single positions

• Marking programme

• As standard the machine is equipped with short-circuit-proof interfaces for de-reelers, prefeeders, coiling
 machines and stackers as well as marking units and ink-jets

• AC-servo positioning drive

• Parallel driven belt feed with drive measuring protected against overloading and with pneumatic
 opening and closing device (optionally additional wheel measuring)

• Pneumatisch betriebener Schneidzylinder garantiert ein müheloses und präzises Schneiden auch von
 Materialien mit einem Durchmesser bis 20 mm (optional Tandemschneidzylinder oder Hydraulikpaket
 je nach benötigter Schneidkraft)

• Cutting force 180 - 30000 N depending on the model

• Clamping force pneumatically adjustable

• Pneumatic pulling-off unit, with a pulling length of 50 mm on each side



 Options

 • Detection of material end

 • Continuous stripping

 • Venturi system for plastic tubes and nylon braids (material is transported by air)

 • TEKUWA PC Kit (PC software for connecting cutting machines to customary PCs)

 • Scanner
 



 Model variations

 30 variations based on the basic model SCM depending on the required maximum diameter
 to be worked, the required maximum total stripping length and on the material to be worked
 




Stripping lengths
260, 290, 350 or 380 mm


Processing diameter
8, 12, 14 or 20 mm


Technical specifications


Power supply:		220/230 V

Watt consumption:	approx. 400 W

Air pressure:		6-10 bar

Noise emission: 	less than 75 dbA

Height:			650 mm

Width:			1240 mm

Depth: 			700 mm

Weight: 		80 - 120 kg depending on the model



The machine is conform with the present and current CE-guide lines.
Subject to technical alterations

 

 

Cutting and stripping machine SCM with one cutting unit
(Image showing 2 cutting units)
Compact electro-pneumatic cutting and stripping machine for single- and multi-conductor cables, solid wires and cords with nearly all customary insulations
 



• Fcable cutting and stripping machine ast and easy operating via the plastic foil keyboard

• Software includes item and job processing

• The installed Compact-Flash card of 128 MB permits to save up to:
  - 99000 production programmes
  - 300 jobs with up to 100 single positions

• Marking programme


 

• As standard the machine is equipped with short-circuit-proof interfaces for de-reelers, prefeeders, coiling
  machines and stackers as well as marking units and ink-jets

• AC-servo positioning drive

• Parallel driven belt feed with drive measuring protected against overloading and with pneumatic
  opening and closing device (optionally additional wheel measuring)

• Pneumatisch betriebener Schneidzylinder garantiert ein müheloses und präzises Schneiden auch von
  Materialien mit einem Durchmesser bis 20 mm (optional Tandemschneidzylinder oder Hydraulikpaket
  je nach benötigter Schneidkraft)

• Cutting force 180 - 30000 N depending on the model

• Clamping force pneumatically adjustable

• Pneumatic pulling-off unit, with a pulling length of 50 mm on each side


 


 Options

 • Detection of material end

 • Venturi system for plastic tubes and nylon braids (material is transported by air)

 • TEKUWA PC Kit (PC software for connecting cutting machines to customary PCs)

 • Scanner
 



 


 Model variations

 30 variations based on the basic model SCM depending on the required maximum diameter
 to be worked, the required maximum total stripping length and on the material to be worked
 



Stripping lengths
120, 150 or 180 mm

Processing diameter
8, 12, 14 or 20 mm

Technical specifications

Power supply:        220/230 V
Watt consumption: approx. 400 W
Air pressure:          6-10 bar
Noise emission:      less than 75 dbA


Height: 650 mm

Width:  1240 mm
Depth:  700 mm

Weight: 80 - 120 kg depending on the model
 

 


The machine is conform with the present and current CE-guide lines.
Subject to technical alterations.