Tekuwa GmbH

    Tekuwa GmbH

    Finsterbachstr. 13

    79664 Wehr

    info@tekuwa.de

telefon +49 7762 5212-40

fax

+49 7762-5212-44

Exhibition Munich:

productronika 2015

  14.-17. November 2017

  We would be          

  pleased to welcome
  you at our

  stand 201 in hall
  A5.

  Of course it is
  possible 
to make an
  appointment in
  advance- therefor,
  please, send us an
  email.

SCH
Electro-pneumatic / hydraulic cutting machine for cutting flat material, cables up to 150mm² or wires of up to Ø 12mm

  

SCH - 090913Feeder opening height: max. 40 mm
Feeder opening width:  max. 75 mm

• Fast and easy operating via the plastic foil keyboard

Software includes item and order processing

• The installed Compact-Flash card of 128 MB permits to save up
   to:  
- 30.000 production programmes  
        
- 300 jobs with up to 100 single positions

• Standard electrical exists protected against short circuits for de-reeler, prefeeders, coiling machines and stackers as well as marking units



• AC-servo positioning drive with start and brake ramp control
• Parallel driven belt feed supported by six rollers with drive measuring and with pneumatic opening and
  closing device. Cutting capacity up to 2000 cycles / an hour (depending on the material)

• Hydro-pneumatic cutting cylinder with guillotine, blade made of HSS-steel with cutting force from 0-15000 N or 0-30000 N


Options  

• Wheel measuring  

• TEKUWA PC Kit (PC software for connecting cutting machines to customary PCs)  


Technical specifications 

Power supply: 230 V

Air consumption: 3.5 l at 6 bar
Air pressure:   6-10 bar

Electr. power connection: approx. 400 Watt

Length of belt feed: approx. 400 mm
Force of belt feed:   max. 1500 N

Feeder opening width:   max. 75 mm
Feeder opening height: max. 40 mm

Height:  530 mm
Width:   930 mm
Depth:   750mm
Weight: approx. 105 kg  

 

 

 

The machine is conform with the present and current CE-guide lines.
Subject to technical alterations

 

 

Cutting machine Servo CUT CAM
Fast electro-pneumatic cutting machine controlled by a micro-processor for precise cutting of materials which can not be processed on a customary machine
 



Exammicro-processor controlled cutting machine (camera cutter)ples of application
The machine can be used for cutting plastic materials with optically significant surface such as convoluted tubes with technical connecting pieces which can be detected by a camera system. The processing diameter ist between 5 - 35 mm depending on the material guide tube.




Control

• The machine is equipped with a micro-processor control unit which is able in connection with
 a processor-controlled camera to detect the product within a few miliseconds, to measure its position
 and to evaluate the data so the AC-servo drive positions according to the customer's requirement

• Teach-in point of technical connecting piece at the beginning or at the end per length can be chosen

• The programme permits the entering of 20 different lengths, 20 different lengths of connecting pieces,
 20 different waste pieces and 20 different taught-in geometries of connecting pieces

• Choiche of language: German, English, French, Italian, Spanish, Portuguese


Software

• Via the software the required length, speed, length of technical connecting piece, number
 of pieces, length correction of connecting pieces, of batch length and
 waste batch length are programmed

• The adjustment values can be changed during operation

• Memorizing of the programmes with all necessary data indexed by a 16-digit item number
 (Capacity of memory: approx. 128 MB)


Mechanics

• Solid parallel driven belt feed, supported by three or five rollers (width: 45 mm) which is driven
 by an AC-servo positioning drive

• Installed camera after the belt drive and directly before the cutting and clamping units


Cutting unit
There is the choice between three model variations that differ in their cutting unit:

• Cutting unit with guillotine for diameters from 5 mm - 15 mm
• Rotary cutting unit for diameters from 10 mm - 35 mm


Technical specifications


Power supply:		220/230 V (auf Wunsch 110 V)

Watt cunsumption:	approx. 500 W

Air pressure:		6 bar

Noise emission: 	less than 75 dbA

Height:			670 mm

Width:			700 mm

Depth: 			690 mm

Weight: 		approx. 80 kg 



The machine is conform with the present and current CE-guide lines.
Subject to technical alterations

 

 

SMH with hydraulic cutting unit



Electro-pneumatic / hydraulic cutting machine for cutting steel cables of a Ø of up to 12 mm (Ø 20 mm), copper cords of up to 150 mm²
 



SMH: hydraulic cable cutting machine Fast and easy operating via the plastic foil keyboard

• Software includes item and order processing

• The installed Compact-Flash card of 128 MB permits to
   save up to:
  - 99000 production programmes
  - 300 jobs with up to 100 single positions

 • As standard the machine is equipped with short-circuit-proof 
   interfaces for de-reelers, prefeeders, coiling machines and
   stackers as well as marking units and ink-jets

• AC-servo positioning drive with start and brake ramp control

• Parallel driven belt feed supported by six rollers with drive measuring and with 
  pneumatic opening and closing device. Infinitely variable speed regulation from
  0 - 2.5 m/sec

• Hydro-pneumatic cutting cylinder having double effect, equipped with two V-cutting blades made of
  HSS tool-steel with adjustable cutting force from 0 - 15000 N or 0 - 30000 N



 Options

 • Wheel measuring

 • TEKUWA PC Kit (PC software for connecting cutting machines to customary PCs)
 




Technical specifications

Power supply: 220/230 V
Air pressure: 6-10 bar
Length of belt feed: ca. 400 mm
Force of belt feed: max. 1500 N

Feeder opening width: max. 30 mm
Feeder opening height: max. 30 mm

Height: 500 mm
Width: 1000 mm
Depth: 630 mm
Weight: approx. 90 kg  



The machine is conform with the present and current CE-guide lines.
Subject to technical alterations

SMR with rotating blade
Electro-pneumatic cutting machine with micro-processor for cutting difficult materials such as profiles, tubes etc. up to a maximum width of 50 mm and a maximum height of 40 mm, straight cuts without deforming or squeezing the material
 

 

SMR: cutting machine with rotary blade Fast and easy operating via the plastic foil keyboard

• Software includes item and order processing

• The installed Compact-Flash card of 128 MB permits to
   save up to:
   - 99000 production programmes
   - 300 jobs with up to 100 single positions

 • As standard the machine is equipped with short-circuit-proof
   interfaces for de-reelers, prefeeders, coiling
   machines and stackers as well as marking units and ink-jets

• AC-servo positioning drive with start and brake ramp control

• Parallel driven belt feed supported by six rollers with drive measuring and with pneumatic opening and
   closing device. Infinitely variable speed regulation from 0 - 2.5 m/sec

• Belt feed pressure pneumatically adjustable

• Pneumatic cutting unit with rotating blade or saw blade, diameter 170 - 250 mm


 Options

 • Wheel measuring
 



Technical specifications

Power supply: 220/230 V
Air pressure: 6-10 bar

Height:   500 mm
Width:  1000 mm
Depth:    630 mm
Weight: approx. 90 kg  

 

The machine is conform with the present and current CE-guide lines.
Subject to technical alterations